Apple Computer iBOOK (FireWire) free download

File name pc_notebook_®_.pdf

K Service Source iBook iBook, iBook (FireWire) Updated December 5, 2002 © 2002 Apple Computer, Inc. All rights reserved. K Service Source Take Apart iBook / iBook (FireWire) © 2002 Apple Computer, Inc. All rights reserved. Take Apart Tools - 1 Tools Use the following tools for procedures in this chapter: · Coin the size of a U.S. quarter (to remove battery door) · 5 mm nut driver · 4 mm nut driver (to remove sound board on iBook) · Torx T8 screwdriver · #0 Phillips screwdriver (for optical drive bezel screws) · #1 Phillips screwdriver · Very small jeweler's flat-head screwdriver (for keyboard locking screw) · Flat-blade tool, ESD-safe, non-marring (such as the nylon probe tool 922-5065) · I C extractor (to remove display cable connector) · Fine point needle nose pliers (to adjust handle tension) Take Apart Cables - 2 Cables Follow these guidelines when working with cables: · Ensure that all cables are routed exactly as they were found when reassembling. Use all grooves and/or protrusions to align cabling. If the cable is improperly routed, you may not be able to reassemble the computer, or once reassembled, the computer may fail to function. · Check that all cables are properly aligned in the connectors and that the connections are tight. · Handle flex cables carefully. Using excessive force to disconnect a cable can tear or damage it so it will not work properly. · Use a nylon tool or dental pick to help loosen cable connections. Take Apart Battery - 3 Battery Before you begin, unplug the AC adapter. 1. Use a coin to turn the battery door screws to the left a quarter turn. The screws will pop up but not come out all the way. 2. Remove the battery door and pull up on the plastic tab attached to the battery to remove it from the compartment. Take Apart CD-ROM Bezel - 4 CD-ROM Bezel Before you begin, remove the following: · AC adapter · Battery 1. Turn the computer over and press the manual disc eject button to eject the CD tray. 2. Use a #0 Phillips screwdriver to remove the small screw on the CD tray near the center of the bezel. 3. Carefully rotate the bezel as shown, to remove. Take Apart DVD-ROM Bezel - 5 DVD-ROM Bezel Before you begin, remove the following: · AC adapter · Battery 1. Press the manual disc eject button to eject the DVD tray. 2. Use a #0 Phillips screwdriver to remove the three small screws shown here. Replacement Note: The screw holes strip easily. Gently tighten the screws. Do not overtighten. Take Apart DVD-ROM Bezel - 6 3. Turn the computer over. 4. With a non-marring flat-blade tool, carefully push where shown to release the tab catch. 5. Carefully pull the bezel straight off to remove. Take Apart Keyboard and AirPort Card - 7 Keyboard and AirPort Card Before you begin, remove the following: · AC adapter · Battery 1. Place a cloth on the palmrest to protect it from scratches. 2. Locate the two keyboard release tabs on the keyboard to the left of the F1 and F9 keys, and slide them toward you. Take Apa